| Hydraulic Pressure | 10-12MPa | Rollers | 11 Rollers |
| Hydraulic Oil | 40# Hydraulic Oil | Speed | 20-25m/min Or As You Want |
| Electronic Control System | PLC, Touch Screen, Encoding Counter | Name | Glazed Tile Making Machine |
| Cutting Blade Material | Cr12 | Rolling Material | 45# Steel，roller Surfaces Polishing, Hard Plating |
| High Light | Step tile roll forming machine, glazed tile making machine | ||
Aluminium Roofing Sheet Making Machine Roof Step Tile Roll Forming Machine Glazed Tile Forming Machine
Company View
Technical Parameters
| Raw Material | |
| Material | Colored steel sheet, galvanized steel sheet, aluminum sheet |
| Thickness of Coil Sheet | 0.2-0.8 mm |
| Material Expand Width | 1000mm |
| Efficiency Width | 840mm |
| Machine Details | |
| Roller Material | High grade NO. 45 forged steel with 0.05mm hard chrome plating |
| Shaft Material | High grade NO. 45 carbon wrought steel |
| Cutting Blade | Cr12 mould steel with quenched treatment |
| Diameter of Shaft | 70mm or as your requirement |
| Main frame | 300 H steel |
| Forming Steps | 11 stations |
| Productivity | 3-4m/min |
| Hydraulic Station Power | 3.7 KW |
| Hydraulic Pressure | 10-12MPa |
| Appearance Size | 6200mm*1500mm*1500mm |
| Hydraulic Oil | 40# hydraulic oil |
| Electric Tension | 380V 50 Hz 3 Phase or as your requirement |
| Cut Mode | Hydraulic forming after cutting off |
| Cutter Materia | Cr12 Heat Treatment |
| Electronic Control System | PLC, Touch Screen, Encoding counter |
| Color | Blue, green or yellow or as your requirement |
| Rolling Material | 45# steel,roller surfaces polishing, hard plating |
Detail Description
| Tension Type Decoiler | Functional Configuration | The worker put coil on the manual decoiler, and tensioning it through spanner. |
| Technical Parameters | The maximum load capacity 5 Ton The coil inside diameter φ508mm Suitable coil width 1000mm |
|
| Main Machine System | Roll Forming System | Roll forming system consists of machine frame, drive disk assembly and cold bending rollers, ect. The machine Section production and then splicing it. Cr12 Heat Treatment,roller surfaces polishing, hard plating. Support structure in the form of roller shaft. All motors use dedicated motor, has excellent mechanical properties. Powered by a hydraulic motor system, it has small machine noise, and stable speed rapid prototyping. |
| System For Forming After Cutting Off | Adopting rolling forming then cut the sheet. No waste here, Cutting knife is made of the Cr12 after quenching. Using combined frame type to cut the machine frame. The characteristics is good maintainability and easy to adjust. Hydraulic stations offer the cutting power. |
|
| Structural Features | Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped. Cut-off tool: Use of high strength wear thicker type mold, it is advantageous to avoid cutting off at deformation. |
FAQ
1. Can you be responsible for transport?
Yes, please tell me the destination port or address.we have rich experience in transport.
2. You are Trade Company or factory?
We are trade company but we also have own factories. Building Trade Company is just for exporting various types of cold roll forming machines.
3. Why your price is higher than others?
As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem. We can provide 2 years free quality assurance.
4. How long the machine could be made?
Normally speaking, welded pipe making machine could be made without 45 working days. If you need machines in a hurry, we can make it for you less than a month.
1. Can you be responsible for transport?
Yes, please tell me the destination port or address.we have rich experience in transport.
2. You are Trade Company or factory?
We are trade company but we also have own factories. Building Trade Company is just for exporting various types of cold roll forming machines.
3. Why your price is higher than others?
As we persist on that each factory should put quality at the first place. We spend time and money on developing how to make machines much more automatic, accurate and high quality. We can make sure that our machine could use more than 20 years without any problem. We can provide 2 years free quality assurance.
4. How long the machine could be made?
Normally speaking, welded pipe making machine could be made without 45 working days. If you need machines in a hurry, we can make it for you less than a month.
Machine Pictures
