| Thickness | 0.3mm-0.8mm | Coil Width | 1200mm |
| Shaft Diameter | 70mm | Roller Material | High Grade NO. 45 Forged Steel With 0.05mm Hard Chrome Plating |
| Shaft Material | High Grade NO. 45 Carbon Wrought Steel | Tile Type | Colored Glaze Steel |
| Name | Sheet Metal Roll Forming Machines | Weight | 8T |
| Speed | 20m/min | Color | Blue |
| High Light | 70mm shaft aluminium roll forming machine, 1200mm aluminium roll forming machine, plc aluminium roll forming machine | ||
Steel Panel Steel Sheet Trapezoidal IBR Metal Roof Making Roll Forming Machine
Production Process
Uncoiling → Feeding material into machine → Roll forming → Auto cutting → Products receiving
Uncoiling → Feeding material into machine → Roll forming → Auto cutting → Products receiving
Technical Parameters
| Suitable Material | Material | GI, PPGI, PPGL, Aluminum |
| Width | 1200 mm | |
| Thickness | 0.3-0.8 mm | |
| Material of Rollers | High grade 45# forged steel, surface hard chromium plating | |
| Rows of Rollers | Up layer: 13 stations; Middle layer: 12 stations; Down layer: 13 stations | |
| Material of Shafts | High grade 45# forged steel | |
| Diameter of Shafts | 70 mm | |
| Material of Cutting blade | Cr12 Heat Treatment | |
| Cutting Mode | Hydraulic Guide Column | |
| Speed | Up layer: 3-4 m/min Middle/Down layer: 10-15 m/min | |
| Side Plate Thickness | 16 mm | |
| Chain Size | 1 inch | |
| Total Power | 7.5 kw | |
| Voltage | 380 V 50 HZ 3 Phase | |
| Appearance Size | 7000mm*1500mm*1600mm | |
| Weight | 8 tons | |
| Operating Mode | Button + Touch screen | |
Standard Configuration
| 5 Tons Manual Decoiler | 1 set |
| Main Roll Forming Machine | 1 set |
| Hydraulic Pump System | 1 set |
| PLC Control System | 1 set |
| Receiving Table | 1 set |
| Spare Parts | 1 set |
Manual Decoiler
| Capacity | 5T |
| Inner Diameter | 450-550mm |
| Width | 1250mm |
Spare Parts
Receiving Table
Packing Method
Main machine is packaged with plastic film
Main machine is packaged with plastic film
Transportation
All machines need one 40 feet container to hold
Payment Term
30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment.
Delivery Time
Within 45 days after receiving deposit.
Warranty
Two years, and we will provide technical support for wholelife of the equipment.
If some parts of machine broken within 2 year, we will give customer the spare parts for free. (include chain, bearing, roller,oil pipe, counting wheel) If more than 2 year, maybe some spare parts need to be charged. If machine can not work well, we can teach them online until the machine is perfect. If you need, we can go to your place to assist you. But you need to provide the cost of the engineer.
