| Voltage | 380V | Name | Double Layer Roll Forming Machine |
| After-Sales Service Provided | Online Support | Warranty | 1 Year |
| Control System | PLC | Power(w) | 5.5 Kw |
| Diameter of Shafts | 70mm | Color | Blue |
| Thickness | 0.3-0.8mm | Speed | 15-20 M/min |
| High Light | 5.5kw roofing sheet roll forming machine, ppgi roofing sheet roll forming machine, ppgi double layer roofing sheet roll forming machine | ||
Double Metal Layers Roof Panel Roll Forming Machine For PPGI
Double layer roofing tile machine: can produce two type sheets, one corrugated sheet and one IBR sheet. The input material are both 1200 mm width with thickness 0.3-0.8mm. Machine speed 20-25 m per minute. With pre-cutting device and double inches chain. This machine cheaper and stable. Widely used in South America zone. Expecially Bolivia. We can also supply you the PPGI and GI coils. We know some good supplier. We can put the coils with the machine in the same container.
Processing Flow Diagram of Machine
Production Process
Uncoiling → Feeding material into machine → Roll forming → Auto cutting → Products receiving
Uncoiling → Feeding material into machine → Roll forming → Auto cutting → Products receiving
Technical Parameters
| Coil Type | Pre-painted coil,Galvanized steel |
| Width | 1000mm |
| Thickness Range | 0.2-0.6mm |
| Yield Stress(mm) | Q235 |
| Effective Width | 870/900mm |
| Power Requirement | Voltage | (380V 50HZ),or according client require |
| Main Motor Power | 5.5kw | |
| Cutter Power | 5.5kw | |
| Forming Speed | 10-15m/min | |
| Forming Stations | 900:11row axis 870:13 row axis diameter 70 axis | |
| Main Frame | 300H beam | |
| Sidewall Thickness | 14mm | |
| Forming Shaft Diameter | 70mm 0.01mm-0.03mm(Grinding) | |
| Chains | 1inch chain drive | |
| Type of Cutting | Roll formed and length-set cutting | |
| Control System | PLC control | |
| Install Dimension(Depend on the final design) | 7.3m×1.2m×1.3m | |
| Total Weight (Approx) | 5T | |
| Roller | High grade 45# steel, hard chrome plated | |
| Feeding System | Guide type | |
| Cutting Blade | Cr12 | |
| Frequency Changer | Delta | |
Standard Configuration
| 5 Tons Manual Decoiler | 1 set |
| Main Roll Forming Machine | 1 set |
| Hydraulic Pump System | 1 set |
| PLC Control System | 1 set |
| Receiving Table | 2 sets |
| Spare Parts | 1 box |
Spare Parts
Packing Method
Main machine is packaged with plastic film
Main machine is packaged with plastic film
Transportation
All machines need one 40 feet container to hold
Payment Term
30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment.
Delivery Time
Within 35 days after receiving deposit.
Main Pictures
Warranty
Two years, and we will provide technical support for wholelife of the equipment.
If some parts of machine broken within 2 year, we will give customer the spare parts for free. (include chain, bearing, roller,oil pipe, counting wheel) If more than 2 year, maybe some spare parts need to be charged. If machine can not work well, we can teach them online until the machine is perfect. If you need, we can go to your place to assist you. But you need to provide the cost of the engineer.
We provide an extensive line of products, including: roof and wall panel machine, tile roof machine, purline forming machine,shutter door machine, floor decking machine and other associated equipment. Our roll forming machines are equipped with PLC control to ensure high accuracy and easy operation.
Two years, and we will provide technical support for wholelife of the equipment.
If some parts of machine broken within 2 year, we will give customer the spare parts for free. (include chain, bearing, roller,oil pipe, counting wheel) If more than 2 year, maybe some spare parts need to be charged. If machine can not work well, we can teach them online until the machine is perfect. If you need, we can go to your place to assist you. But you need to provide the cost of the engineer.
We provide an extensive line of products, including: roof and wall panel machine, tile roof machine, purline forming machine,shutter door machine, floor decking machine and other associated equipment. Our roll forming machines are equipped with PLC control to ensure high accuracy and easy operation.
FAQ
1. Can you make the machine according to my design or photo type?
A: Yes. We have an experienced engineers to work out the most suitable design and production plan for the machine.
2: How can we be assured that you will deliver us quality machine with spare parts?
A: 1. Customers to send the technical people to our factory for checking the quality.
2. We can send the technicians to the buyer`s factory for the installation and trainning .
3. What about your warrenty?
A: Within the One-YEARS period, we could supply you the replacement parts for free .
If any damaged parts caused by quality problems after two years,we will also help but customer pay the cost.
