| Power | 4 KW | Thickness | 0.2-0.8 mm |
| Control System | PLC (Touch Screen) | Production Capacity | 20-25m/min |
| Dimension(L*W*H) | 5800*1700*1500 mm | Name | Cold Roll Forming Machine |
| High Light | Steel sheet roll forming machine, metal roofing sheet making machine |
||
New Profile Hydraulic Type Sheet Metal Roll Forming Machines Speed 25 Meters Per Minute
Technical Parameters
| Roller Material | High grade NO. 45 forged steel with 0.05mm hard chrome plating |
| Shaft Material | High grade NO. 45 carbon wrought steel |
| Cutting Blade | Cr12 mould steel with quenched treatment |
| Diameter of Shaft | 70mm or as your requirement |
| Main Frame | 300 H steel |
| Forming Steps | 11 stations |
Device Configuration
| Manual Decoiler | 1 set |
| Guiding Device | 1 set |
| Main Roll Forming Machine | 1 set |
| Hydraulic Cutting Device | 1 set |
| PLC Electric Control System | 1 set |
| Hydraulic Driving System | 1 set |
| Special Tools And Parts | 1 set |
Equipment For Process Flow
Consist of Decoiler, Main roll forming machine, Cutting device, Hydraulic drive system, Electric control cabinet
Consist of Decoiler, Main roll forming machine, Cutting device, Hydraulic drive system, Electric control cabinet
| Tension Type Decoiler | Functional configuration | The worker put coil on the manual decoiler, and tensioning it through spanner. |
| Technical parameters | The maximum load capacity 5 Ton; The coil inside diameter φ508mm; Suitable coil width 1250mm | |
| Main Machine System | Roll forming system | Roll forming system consists of machine frame, drive disk assembly and cold bending rollers, ect. The machine Section production and then splicing it. Cr12 Heat Treatment,roller surfaces polishing, hard plating. Support structure in the form of roller shaft. All motors use dedicated motor, has excellent mechanical properties. Powered by a hydraulic motor system, it has small machine noise, and stable speed rapid prototyping. |
| System for forming after cutting off | Adopting rolling forming then cut the sheet. No waste here, Cutting knife is made of the Cr12 after quenching. Using combined frame type to cut the machine frame. The characteristics is good maintainability and easy to adjust. Hydraulic stations offer the cutting power. |
|
| Structural features | Material of rollers:45# steel,roller surfaces polishing, hard plating , The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped. Cut-off tool: Use of high strength wear thicker type mold, it is advantageous to avoid cutting off at deformation. |
|
| Hydraulic System | ||
| Description | The main valve parts adopt domestic high-quality brand. Oil cylinder and oil pump adopt national standard rod oil cylinder, easy to purchase all over the world. The motor is national standard copper core, universal around the world. |
|
| Characteristic | The hydraulic system after optimization design, compact structure, with beautiful appearance Stable performance and good durability. |
|
| Electronic Control System | ||
| Description | The machine used well-known brand of Delta PLC control technology. To realize the automatic machine. The system to provide friendly man-machine interface, It can be set batch, workpiece length and number, etc. Encoder count, count and length with function. PLC touch screen adopt domestic famous brands. |
|
| Characteristic | Adopt touch screen control box through the man-machine interface, convenient operation, good appearance, consistent with the whole equipment. The main components adopt France Schneider, It will stable performance, good reputation, global procurement. Using a number of control technology, automation degree is high. Encoder count, length accurately. |
|
Machine Pictures
Accumulate a little improvement, molded a perfect quality !
