| Type | Single Layer Machine | Model | 23 -143 -1000 |
| Coil Width | 1220mm | Name | Roof Roll Forming Machine |
| Material Of Blade | Cr12 | Certification | CE ISO9001 |
| Size | 6.9m * 1.5m * 1.51m | Color | Red And Bule Or As U Want |
| High Light | Metal roof roll forming machine, steel sheet roll forming machine | ||
Automatic High Quality Used Sheet Metal Roof Cold Roll Forming Machine
Components of Trapezoidal / Ibr Roof Panel Machine
The components of this roof panel machine are: Manual/automatic decoiler, roll forming machine, plc control system, hydraulic part, cutting part and discharge table.
The components of this roof panel machine are: Manual/automatic decoiler, roll forming machine, plc control system, hydraulic part, cutting part and discharge table.
Main Parameters
| Raw Material | |
| Material | Colored steel sheet, galvanized steel sheet, aluminum sheet |
| Thickness of Coil Sheet | 0.2-0.8 mm |
| Material Expand Width | 1220mm |
| Efficiency Width | 1000mm |
| Machine Details | |
| Roller Material | High grade NO. 45 forged steel with 0.05mm hard chrome plating |
| Shaft Material | High grade NO. 45 carbon wrought steel |
| Cutting Blade | Cr12 mould steel with quenched treatment |
| Diameter of Shaft | 70mm or as your requirement |
| Main Frame | 300 H steel |
| Forming Steps | 14 stations |
| Productivity | 20-25m / min |
| Hydraulic Station Power | 5.5 KW |
| Middle Plate | 16mm |
| Hydraulic Pressure | 10-12MPa |
| Appearance Size | 7200mm*1500mm*1500mm |
| Hydraulic Oil | 40# hydraulic oil |
| Electric Tension | 380V 50 Hz 3 Phase or as your requirement |
| Cut Mode | Hydraulic forming after cutting off |
| Cutter Materia | Cr12 Heat Treatment |
| Electronic Control System | PLC, Touch screen, Encoding counter |
| Color | Blue, green or yellow or as your requirement |
| Rolling Material | 45# steel, roller surfaces polishing, hard plating |
Main Pictures
