| Voltage | 380V | Name | Double Layer Roll Forming Machine |
| After-Sales Service Provided | Online Support | Warranty | 1 Year |
| Control System | PLC | Power(w) | 5.5 Kw |
| Diameter of Shafts | 70mm | Color | Blue |
| Thickness | 0.3-0.8mm | Speed | 15-20 M/min |
| High Light | 0.8mm double layer roll forming machine, 5.5kw double layer roll forming machine, double layer roofing sheet roll former | ||
Double Layer Roof Roll Forming Making Machine With Price
Double layer roofing tile machine: can produce two type sheets, one corrugated sheet and one IBR sheet. The input material are both 1200 mm width with thickness 0.3-0.8mm. Machine speed 20-25 m per minute. With pre-cutting device and double inches chain. This machine cheaper and stable. Widely used in South America zone. Expecially Bolivia. We can also supply you the PPGI and GI coils. We know some good supplier. We can put the coils with the machine in the same container.
Processing Flow Diagram of Machine
Production Process
Uncoiling → Feeding material into machine → Roll forming → Auto cutting → Products receiving
Uncoiling → Feeding material into machine → Roll forming → Auto cutting → Products receiving
Technical Parameters
| Suitable Material | Material | GI, PPGI, PPGL |
| Width | 1200 mm | |
| Thickness | 0.3-0.8 mm | |
| Material of Rollers | High grade 45# forged steel, surface hard chromium plating | |
| Rows of Rollers | Up layer : 10 stations; Down layer : 13 stations | |
| Material of Shafts | High grade 45# forged steel | |
| Diameter of Shafts | 70mm | |
| Material of Blade | Cr12 Heat Treatment | |
| Cutting Mode | Hydraulic Guide Column | |
| Speed | 15-20 m/min | |
| Side Plate Thickness | 16 mm | |
| Chain Size | 1 inch | |
| Total Power | 4 kw | |
| Voltage | 380V 50HZ 3Phase | |
| Appearance Size (About) | 6000mm*1500mm*1600mm | |
| Weight (About) | 4.5 tons | |
| Electronic Control System | PLC + Touch Screen | |
Standard Configuration
| 5 Tons Manual Decoiler | 1 set |
| Main Roll Forming Machine | 1 set |
| Hydraulic Pump System | 1 set |
| PLC Control System | 1 set |
| Receiving Table | 2 sets |
| Spare Parts | 1 box |
Spare Parts
Packing Method
Main machine is packaged with plastic film
Main machine is packaged with plastic film
Transportation
All machines need one 40 feet container to hold
Payment Term
30% deposit by T/T in advance and 70% balance after inspection confirmation before shipment.
Delivery Time
Within 35 days after receiving deposit.
Warranty
Two years, and we will provide technical support for wholelife of the equipment.
If some parts of machine broken within 2 year, we will give customer the spare parts for free. (include chain, bearing, roller,oil pipe, counting wheel) If more than 2 year, maybe some spare parts need to be charged. If machine can not work well, we can teach them online until the machine is perfect. If you need, we can go to your place to assist you. But you need to provide the cost of the engineer.
Packaging
1. Tighten to container with steel wire rope and welded machine with container by angel iron
2. Main forming machine and un-coiler is naked (If you need we can also packed with water-proof plastic)
3. PLC contral system and motor pump are packed with water proof paper
Shipping
1. One 20″ container
2. One 40″container
Main Pictures
